Service Menu

Inspect all fluid levels and condition. Check belts and hoses. Lube door and hood hinges, lube steering, suspension and driveline. Clean exhaust system. Includes up to 6 quarts of motor oil and new ACDelco air filter. Diesels and synthetic oil may be slightly higher.

Check and set tire pressures. Rotate tires & wheels and Reset Tire Pressure Monitor

Check tire pressures & adjust as necessary. Balance four tires. Rotate tires. Inspect tires and wheels for abnormal wear & damage. Torque wheel nuts as recommended - Reset Tire Pressure Monitor system

Change engine oil and filter. Reset oil life system. Visually check for any leaks or damage. Rotate and inspect tires. Check inflation pressure and wear. Inspect brake system, including brake lines, hoses, pads, calipers, wheel cylinders, rotors, and drums. Check engine coolant and windshield washer fluid. Perform any additional needed services. Trucks: Lubricate front suspension, ball joints, steering linkage, and parking brake cable. Trucks with Allison Transmission only: Inspect external control-main filter; replace if necessary. Additional recommended services and costs, resulting from inspections performed, will be brought to your attention.

Change engine oil and filter. Reset oil life system. Visually check for any leaks or damage. Visually check for any leaks or damage. Inspect engine air cleaner filter; replace if necessary. Rotate and Balance tires. Check inflation pressures and wear. Inspect brake system, including brake lines, hoses, pads, calipers, wheel cylinders, rotors, and drums. Check engine coolant and windshield washer fluid. Inspect engine cooling system. Lubricate body components. Inspect wiper blades for wear or cracking. Inspect restraint system components. Inspect suspension and steering components. Check transmission/transaxle fluid level and add fluid as needed. Trucks without a filter restriction indicator: Inspect engine air cleaner filter. Trucks/Vans: Fuel filter service; replace as necessary. Trucks/Vans: Check air intake. Perform any needed additional services. Additional recommended services and costs, resulting from inspections performed, will be brought to your attention.

Check and adjust caster, camber and set toe. Check tire pressure and wear. Check all steering and suspension. Additional parts and labor may be required on some vehicles.

Physically inspect brake lines, hoses, disc brake pads, and drum brake linings. Estimate remaining life of materials and cost of repairs or serviceability. Check master cylinder and fluid levels.

Inspect condition of all hoses and clamps. Flush and bleed power steering fluid system. Replenish with proper grade fluids.

Flush complete transmission/transaxle including cooler with approved fluid. Adjust linkage if necessary. Filter replacement additional. Check transmission/transaxle operation.

Flush cooling and heating system. Fill with approved coolant based on model application. Inspect condition of all hoses, clamps and belts. Pressure test system. Inspect radiator and water pump for proper operation.

Flush entire brake system including master cylinder, lines, calipers, and wheel cylinders. Inspect all lines and fittings for leaks and or wear.

Complete fuel system service. Flush fuel injectors, clean throttle body, and install chemical additive to fuel tank. Inspect all engine fuel lines, fittings, and injector seals for leaks and or wear.

Complete four wheel drive service flushing both front and rear differentials and flush transfer case fluids. Inspect all covers, plugs, and seals for leaks and or wear.